Awlgrip Sea Green, Gallon. Many professionals consider Awlgrip Two-Part Linear Polyurethane to be the benchmark by which other topcoats are measured. Famous for its high gloss and chip-resistant durability, Awlgrip two-part polyurethane enamel provides resin-rich, clean, bright color. May be applied by brush, spray or roller when used with the appropriate converters. Awlgrip paints are lead-free and comply with Federal regulations. Recommended only for professional applicators using proper safety equipment. Alwgrip Two-Part Linear Polyurethane should not be applied below the waterline. Once it cures, it requires very little maintenanceand should not be waxed, buffed, compounded or polished. Key Features High performance polyester urethane topcoat system Can be applied by spray or "roll and tip" methods Excellent color retention and chemical resistance Superior flow and leveling Tough and durable with outstanding longevity Repairable; conventional polyester urethanes can sometimes be difficult to repair For above-the-waterline application on properly prepared and primed fiberglass, wood, steel and aluminum substrates Physical Data Base Formulation: To-component linear aliphatic polyester polyurethane Finish: High gloss VOC Base: 470g/l or 3.9lb./gallon VOC Spray Converter: (G3010) 591g/l or 4.9 lb./gallon VOC Brush Converter: (H3002) 276g/l or 2.3lb./gallon Application Recommended Application Method: Brush, roller or spray Number of Coats Recommended: Spray: 2-3; Brush or roller: 2 Primer Needed: Spray: 545 Primer; Brush or roller: AwlQuick Primer Drying Time to Recoat: Spray: 1-4hrs.; Brush or roller: At least 16hrs. Drying Time to Full Cure: 14 days Coverage: Spray: 530sq.ft./gal.; Brush or roller: 700-725 sq.ft/gal. Converters/Reducers/Accelerators: Selected according to application method (brush or spray), ambient temperature and other factors ConvertersAwlgrip two-part
* This offer may contain time-sensitive information and offers. Please check with West Marine to confirm actual price & availability.